Roll Up Doors Dallas and Fort Worth

Roll Up Doors Dallas and Fort Worth

Janus Commercial Sheet Door

• Utilizes 12″ drum wheel
• Maximum opening size of 12′ wide x 18′ high (216 sq.ft.)
• Push-up, hand chain and electric operations
• Curtain – 26-gauge galvanized corrugated steel
• Bottom Bar – 24 gauge acrylic-coated galvalumed roll formed steel
• Axle/Torque Tube – 1-5/16″ O.D. steel axle, 14-gauge, oil tempered torsion springs conforming to ASTM A229
• Guides – 16 gauge galvanized, Universal jamb mount, vinyl guide wear strip, bolt on head stop ¼” thick steel, pre-punched for lock and attachment bolts, 2-1/4″ guide depth
• Hardware – Bottom bar mounted 10 gauge slide locks (2 per door), bottom bar mounted 16 gauge step plate (2 per door), 12 gauge door mounting brackets, 1-5/16″ tension holding device

Janus Heavy Duty Commercial Sheet Door

• Utilizes 12″ drum wheel
• Maximum opening size of 18′ wide x 18′ high (324 sq.ft.)
• Push-up, hand chain and electric operations
• Curtain – 26-gauge galvanized corrugated steel
• Bottom Bar – 24 gauge acrylic-coated galvalumed roll formed steel
• Axle/Torque Tube – 1-5/16″ O.D. steel axle, 14-gauge, oil tempered torsion springs conforming to ASTM A229
• Guides – 12 gauge galvanized, Universal jamb mount, bolt on head stop ¼” thick steel, pre-punched for lock and attachment bolts, 2-7/8″ guide depth
• Hardware – Bottom bar mounted 10 gauge slide locks (2 per door), bottom bar mounted 16 gauge step plate (2 per door), 12 gauge door mounting brackets, 1-5/16″ tension holding device

Janus Self-Storage Door

• Drums – fitted with a grease filled, shielded radial ball bearing to contribute to a smoother operation and reduce wear and friction
• Springs – Oil-tempered helical torsion springs
• Brackets – factory installed galvanized reinforced 16 gauge
• Head Stops – galvanized, guide-mounted; simple to install and prevent curtain over travel when raising the door
• Ratchet Spring Tensioner Assembly – factory installed on the end of the door axle and allows precise fine tuning of the initial spring tension; increments of 1/8 turn are possible
• Bottom Bar – roll formed clear acrylic coated galvanized steel reinforced with a 1-1/2″ x 1-1/2″ 14 gauge full width galvanized angle that extends fully into the guides
• Guides – roll formed, 18 gauge galvanized; fitted with dual polyethylene wear strips to reduce friction and muffle door noises
• Corrugated Curtain – Galvanized and pre-painted with long lasting Super Durable polyester paint; 26 gauge roll formed from ASTM A 653 grade 80 full hard steel
• Barrel – Full width galvanized steel; fully encloses the drums, springs and axle